Passer aux informations produits
1 de 6

Wautton Outdoor Gear

WiFi Robot ESP32 Camera IoT Kit Robot Car ESP32-Cam C++ Programming PDF Tutorial Academy STEM Starter Kit

WiFi Robot ESP32 Camera IoT Kit Robot Car ESP32-Cam C++ Programming PDF Tutorial Academy STEM Starter Kit

Prix habituel $124.14 CAD
Prix habituel Prix promotionnel $124.14 CAD
Promotion Épuisé
Taxes incluses. Frais d'expédition calculés à l'étape de paiement.
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
WiFi Robot ESP32 Camera IoT Kit Robot Car
Description
Imagine if you have a robot that has camera on board and can be controlled through the Internet. It would open a lot of opportunities of using it. For example, you could send the robot to the kitchen to check if you accidentally left the kettle on the stove! I found that with ESP32-CAM it can be done easily. The ESP32-CAM is a very small camera development board with an ESP32-S chip, an OV2640 camera, microSD card slot and several GPIOs to connect peripherals. The OV2640 is a 1/4-inch CMOS UXGA (1632*1232) image sensor. The sensor's small size and low operating voltage provide all the features of a single UXGA camera and image processor.
(1) Motor parameters: Voltage range: 6-9V, reduction ratio of 48:1.
(2) The motor control adopts L298N driver module, which achieves true isolation from MCU.
(3) It can be done through the Internet It controls the intelligent car to achieve real-time video monitoring function.
(4) The use of an external antenna control board enhances WiFi transmission and reception signals, resulting in more stable
performance.

Package List

1 × Black acrylic robot chassis
1 × L298N Motor Drive Module
4 × 5V DC geared motor (with wheels welding wire)
1 × 18650 battery box with switch
1 × ESP32 Cam development board with OV2640 camera module
10 × M3*15 copper pillar
4 × DuPont female to female 20cm
2 × Dupont line male to female 20cm
4 × Motor fixing bracket
16 × M3*10 flat head screws
8 × M3*12 flat head screws
24 × M3 nuts
8 × M3*30 round head screws
2 × M1.6*10 screws
2 × M1.6 nut
4 × M3*8 flat head screws
1 × ESP32(CAM) Car Kit
3 × PE foam sponge double-sided adhesive, strong and high-viscosity foam adhesive (white 24.5*40mm)
1 × Blue driver heat sink small (TMC2100)
1 × ESP32 motherboard shell (black)
1 × Ultrasonic brack
Afficher tous les détails